Internet Engineering Task Force (IETF)                 M. Veillette, Ed.
Request for Comments: 9595                       Trilliant Networks Inc.
Category: Standards Track                                  A. Pelov, Ed.
ISSN: 2070-1721                                           IMT Atlantique
                                                          I. Petrov, Ed.
                                                 Google Switzerland GmbH
                                                              C. Bormann
                                                  Universität Bremen TZI
                                                           M. Richardson
                                                Sandelman Software Works
                                                               June 2024

                 YANG Data Model for YANG Schema Item iDentifiers (YANG-SIDs) iDentifier (YANG SID)

Abstract

   YANG Schema Item iDentifiers (YANG-SIDs) are globally unique 63-bit
   unsigned integers used to identify YANG items.  SIDs provide a more
   compact method for identifying those YANG items that can be used
   efficiently, particularly notably in constrained environments (RFC 7228).  This
   document defines the semantics, registration processes, and
   assignment processes for YANG-SIDs for IETF-managed YANG modules.  To
   enable the implementation of these processes, this document also
   defines a file format used to persist and publish assigned YANG-SIDs.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9595.

Copyright Notice

   Copyright (c) 2024 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction
     1.1.  Terminology and Notation
   2.  Objectives
     2.1.  Technical Objectives
     2.2.  Module Evolution and Versioning
     2.3.  Solution Components and Derived Objectives
     2.4.  Parties and Roles
   3.  ".sid" File Lifecycle
   4.  ".sid" File Format
   5.  ".sid" File YANG Module
   6.  Security Considerations
   7.
   6.  IANA Considerations
     7.1.
     6.1.  YANG Namespace Registration
     7.2.
     6.2.  ".sid" File Format Module Registration
     7.3.
     6.3.  New IANA Registry: YANG-SID Mega-Ranges
       7.3.1.
       6.3.1.  Structure
       7.3.2.
       6.3.2.  Allocation Policy
         7.3.2.1.
         6.3.2.1.  First Allocation
         7.3.2.2.
         6.3.2.2.  Consecutive Allocations
       7.3.3.
       6.3.3.  Initial Contents of the Registry
     7.4.
     6.4.  New IANA Registry: IETF YANG-SID Ranges
       7.4.1.
       6.4.1.  Structure
       7.4.2.
       6.4.2.  Allocation Policy
       7.4.3.
       6.4.3.  Publication of the ".sid" File
       7.4.4.
       6.4.4.  Initial Contents of the Registry
     7.5.
     6.5.  New IANA Registry: IETF YANG-SID Modules
       7.5.1.
       6.5.1.  Structure
       7.5.2.
       6.5.2.  Allocation Policy
       7.5.3.
       6.5.3.  Recursive Allocation of YANG-SID Range YANG-SIDs at Document Adoption
       7.5.4.
       6.5.4.  Initial Contents of the Registry
     7.6.
     6.6.  Media Type and Content-Format Registration
       7.6.1.
       6.6.1.  Media Type application/yang-sid+json
       7.6.2.
       6.6.2.  CoAP Content-Format
   8.
   7.  References
     8.1.
     7.1.  Normative References
     8.2.
     7.2.  Informative References
   Appendix A.  ".sid" File Example
   Appendix B.  SID Autogeneration
   Appendix C.  ".sid" File Lifecycle
     C.1.  ".sid" File Creation
     C.2.  ".sid" File Update
   Appendix D.  Keeping a ".sid" File in a YANG Instance Data File
   Acknowledgments
   Contributors
   Authors' Addresses

1.  Introduction

   Some of the items defined in YANG [RFC7950] require the use of a
   unique identifier.  In both the Network Configuration Protocol
   (NETCONF) [RFC6241] and RESTCONF [RFC8040], these identifiers are
   implemented using names.  To allow the implementation of data models
   defined in YANG in constrained devices [RFC7228] and constrained
   networks, a more compact method to identify YANG items is required.
   This compact identifier, called the YANG Schema Item iDentifier or
   YANG-SID (or simply SID in this document and when the context is
   clear), is encoded using a 63-bit unsigned integer.  The limitation
   to 63-bit unsigned integers allows SIDs to be manipulated more easily
   on platforms that might otherwise lack 64-bit unsigned arithmetic.
   The loss of a single bit of range is not significant, given the size
   of the remaining space.

   The following items are identified using SIDs:

   *  identities

   *  data nodes (note: including those nodes defined by the 'rc:yang-
      data' extension [RFC8040] and the 'sx:structure' extension
      [RFC8791])

   *  remote procedure calls (RPCs) and associated input(s) and
      output(s)

   *  actions and associated input(s) and output(s)

   *  notifications and associated information

   *  YANG modules and features

   It is possible that some protocols will use only a subset of the
   assigned SIDs; for example, for protocols other than NETCONF
   [RFC6241] that provide extensions access to
   NETCONF [RFC6241], YANG-modeled data, such as
   [CORE-COMI], the transport of YANG module SIDs might be unnecessary.
   Other protocols might need to be able to transport this information
   -- for example, protocols related to discovery such as the
   Constrained YANG Module Library [YANG-LIBRARY].

   SIDs are globally unique integers.  A registration system is used in
   order to guarantee their uniqueness.  SIDs are registered in blocks
   called "SID ranges".  Once they are considered "stable", SIDs are
   assigned permanently.  Items introduced by a new revision of a YANG
   module are added to the list of SIDs already assigned.  This is
   discussed in more detail in Section 2.

   The assignment of SIDs to YANG items is usually automated as
   discussed in Appendix B, which also discusses some cases where manual
   interventions may be appropriate.

   Section 3 provides more details about the registration processes for
   YANG modules and associated SIDs.  To enable the implementation of
   these processes, Section 4 defines a standard file format used to
   store and publish SIDs.

   IETF-managed YANG modules that need to allocate SIDs will use the
   IANA mechanisms (e.g., allocation mechanisms) specified in this document.  See Section 7 6 for
   details.  YANG modules created by other parties allocate SID ranges
   using the IANA allocation mechanisms via Mega-Ranges (see
   Section 7.3); 6.3); within the Mega-Range allocation, those other parties
   are free to make up their own mechanism.

   Among other uses, YANG-SIDs are particularly useful for obtaining a
   compact encoding for YANG-CBOR [RFC9254].  At the time of writing, a
   tool for automated ".sid" file generation is available as part of the
   open-source project PYANG [PYANG].

1.1.  Terminology and Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174]
   [BCP14] (RFC 2119) (RFC 8174) when, and only when, they appear in all
   capitals, as shown here.

   The following terms are defined in [RFC7950]:

   *  action

   *  feature

   *  module

   *  notification

   *  RPC

   *  schema node

   *  schema tree

   *  submodule

   This specification also makes use of the following terminology:

   item:  A schema node, an identity, a module, or a feature defined
      using the YANG modeling language.

   YANG Schema Item iDentifier (YANG-SID or simply SID):  Unsigned
      integer used to identify different YANG items (cf. Section 3.2 of
      [RFC9254]).

   YANG name:  Text string used to identify different YANG items
      (cf. Section 3.3 of [RFC9254]).

2.  Objectives

   The overriding objective of the SID assignment and registration
   system is to ensure global interoperability of protocols that employ
   SIDs in order to communicate about data modeled in YANG [RFC7950]. YANG.  This
   objective poses certain requirements on the stability of SIDs while
   at the same time not hindering active evolution of the YANG modules
   the SIDs are intended to support.

   Additional objectives include:

   *  enabling the developer of a YANG module to also be the originating
      entity for the SIDs pertaining to that module.

   *  making it easy for YANG developers to obtain SIDs.

   *  enabling other developers to define SIDs for a module where the
      developer of the module is not interested in assigning the SIDs.

   *  keeping an assignment regime that keeps short SIDs (2..4 bytes)
      readily available for the applications that would benefit from
      them while at the same time employing the vast 63-bit SID space to
      facilitate permissionless actions.

   *  enabling multiple entities to provide services that support the
      assignment of SIDs.

   *  maintaining some locality in the assignment of SIDs so the
      efficiencies of the SID delta mechanism can be fully employed.

   *  enabling various software components to deal operate in terms of SIDs
      without having complete information about other parties in the
      communication process.

   While IANA ultimately maintains the registries that govern SIDs for
   IETF-defined modules, various support tools (such as, at the time of
   writing, the YANG Catalog [yangcatalog]) need to provide the support
   to enable SID assignment and use for modules still in IETF
   development.  Developers of open-source or proprietary YANG modules
   also need to be able to serve as such entities autonomously, possibly
   forming alliances independent of the IETF, while still fitting in the
   overall SID number space managed by IANA.  Obviously, this process
   has a number of parallels to the management of IP addresses but is
   also very different.

2.1.  Technical Objectives

   As discussed in the Introduction, SIDs are intended as globally
   unique (unsigned) integers.

   Specifically, this means that:

   *Objective 1* (MUST):  Any 63-bit unsigned integer either (1) is
      unassigned as a SID or (2) immutably maps to EXACTLY one YANG
      name.  Only the transition from unassigned to that immutable
      mapping is defined.

   This enables a recipient of a data structure employing SIDs to
   translate them into the globally meaningful YANG names that the
   existing encodings of YANG data such as YANG-XML [RFC7950] and YANG-
   JSON [RFC7951] employ today.

   The term "YANG name" is not defined outside this document, and YANG
   has a complex system of names and entities that can have those names.
   Instead of defining the term technically, this set of objectives uses
   it in such a way that the overall objectives of YANG-SID can be
   achieved.

   A desirable objective is that:

   *Objective 2* (SHOULD):  Any YANG name in active use has one SID
      assigned.

   This means that:

   1.  There should not be YANG names without SIDs assigned.

   2.  YANG names should not have multiple SIDs assigned.

   These objectives are unattainable in full, because YANG names are not
   necessarily born with a SID assignment and because entirely
   autonomous entities might decide to assign SIDs for the same YANG
   name without communicating ("like ships in the night").  Note that as
   long as this autonomy is maintained, any single observer will have
   the impression that Objective 2 is attained.  Only when entities that
   have acted autonomously start communicating will a deviation be
   observed.

2.2.  Module Evolution and Versioning

   YANG modules evolve (see Section 11 of [RFC7950] and Section 4.27 of
   [RFC8407]).
   RFC 8407 [BCP216]).  The technical objectives listed above are states
   in terms that are independent of this evolution.

   However, some modules are still in a very fluid state, and the
   assignment of permanent SIDs to the YANG names created in them is
   less desirable.  This is true not only for new modules but also for
   emerging new revisions of existing stable modules.

   *Objective 3* (MUST):  The SID management system is independent of
      any module versioning.

2.3.  Solution Components and Derived Objectives

   A registration system is used in order to guarantee the uniqueness of
   SIDs.  To be able to provide some autonomy in allocation (and avoid
   information disclosure where it is not desirable), SIDs are
   registered in blocks called "SID ranges".

   SIDs are assigned permanently.

   Items introduced by a new revision of a YANG module are added to the
   list of SIDs already assigned.

2.4.  Parties and Roles

   In the YANG development process, we can discern a number of parties
   that are concerned with a YANG module:

   module controller:
      The owner of the YANG module, i.e., the controller about its of the module's
      evolution.

   registration entity:
      The controller of the module namespace, specifically also of the
      prefixes that are in common use.  (This is not a required party.)

   module repository:
      An entity that supplies modules to module users.  This can be an
      "official" entity (e.g., IANA for IETF modules) or an "unofficial"
      entity (e.g., the YANG Catalog [yangcatalog]).  Not all
      repositories are in a position to act as a registry, i.e., as a
      permanent record for the information they supply; these
      repositories need to recur to module owners as a stable source.

   module user:
      An entity that uses a module, after obtaining it from the module
      controller or a module repository.

   This set of parties needs to evolve to take on the additional roles
   that the SID assignment process requires:

   SID assigner:
      An entity that assigns SIDs for a module.  Objective 2 aims at
      having only one SID assigner for each module.  SID assigners
      preferably stay the same over a module development process;
      however, this specification provides ".sid" files to ensure an
      organized handover.

   SID range registry:
      An entity that supplies a SID assigner with SID ranges that it can
      use in assigning SIDs for a module.  (In this specification, there
      is a structure with Mega-Ranges and individual SID ranges; this is
      not relevant here.)

   SID repository:
      An entity that supplies SID assignments to SID users, usually in
      the form of a ".sid" file.

   SID user:
      The module user that uses the SIDs provided by a SID assigner for
      a YANG module.  SID users need to find SID assigners (or at least
      their SID assignments).

   As new the use of SIDs are with YANG data models is introduced, the
   distribution of the SID roles to the existing parties for a YANG
   module will evolve.

   The desirable end state of this evolution is shown in Table 1.

       +====================+======================================+
       | Role               | Party                                |
       +====================+======================================+
       | SID assigner       | module developer                     |
       +--------------------+--------------------------------------+
       | SID range registry | (as discussed in this specification) |
       +--------------------+--------------------------------------+
       | SID repository     | module repository                    |
       +--------------------+--------------------------------------+
       | SID user           | module user (naturally)              |
       +--------------------+--------------------------------------+

               Table 1: Roles and Parties: Desired End State

   This grouping of roles and parties puts the module developer in a
   position where it can achieve the objectives laid out in this section
   (a "type-1", "SID-guiding" module controller).  (While a third party
   might theoretically assign additional SIDs and conflict with
   Objective 2, there is very little reason to do so if ".sid" files are
   always provided by the module developer with the module.)

   The rest of this section is concerned with the transition to this end
   state.

   For existing modules, there is no ".sid" file.  The entity that
   stands in as the SID assigner is not specified.  This situation has
   the highest potential for conflict with Objective 2.

   Similarly, for new module development, the module owner may not have
   heard about SIDs or may not be interested in assigning them (e.g.,
   because of lack of software or procedures within their organization).

   For these two cases (which we will collectively call "type-3", "SID-oblivious" "SID-
   oblivious" module controllers), controller), module repositories can act as a
   mediator, giving SID users access to a SID assigner that is carefully
   chosen to be a likely choice by other module repositories as well,
   maximizing the likelihood of achieving Objective 2.

   If a module controller has heard about SIDs but is not assigning them
   yet, it can designate a SID assigner instead.  This can lead to a
   stable, unique set of SID assignments being provided indirectly by a
   ("type-2", "SID-aware") module developer.  Entities offering
   designated SID assigner services could make these available in an
   easy-to-use way, e.g., via a web interface.

   The entity acting as a SID assigner minimally needs to record the SID
   range it uses for the SID assignment.  If the SID range registry
   employed can record the module name and revision and if the
   assignment processes (including the software used) are stable, the
   SID assigner can theoretically reconstruct its assignments, but this
   could invite implementation bugs.

   SID assigners attending to a module in development (not yet stable)
   need to decide whether SIDs for a new revision are reassigned from
   scratch ("clean slate") or use existing assignments from a previous
   revision as a base, only assigning new SIDs for new names.  Once a
   module is declared stable, its SID assignments SHOULD be declared
   stable as well (except that, for existing YANG modules, some review
   may be needed before this is done).

   This specification does not further discuss how mediating entities
   such as designated SID assigners or SID repositories could operate;
   instead, it supplies objectives for their operation.

3.  ".sid" File Lifecycle

   YANG is a language designed to model data accessed using one of the
   compatible protocols (e.g., NETCONF [RFC6241], RESTCONF [RFC8040],
   and the CoAP Management Interface (CORECONF) [CORE-COMI]).  A YANG
   module defines hierarchies of data, including configuration, state
   data, RPCs, actions, and notifications.

   Many YANG modules are not created in the context of constrained
   applications.  YANG modules can be implemented using NETCONF
   [RFC6241] or RESTCONF [RFC8040] without the need to assign SIDs.

   As needed, authors of YANG modules can assign SIDs to their YANG
   modules.  In order to do that, they should first obtain a SID range
   from a registry and use that range to assign or generate SIDs to
   items in their YANG module.  The assignments can then be stored in a
   ".sid" file.  For an example of how this could be achieved, please
   refer to Appendix C.

   Items introduced by a new revision of a YANG module are added to the
   list of SIDs already assigned.  When this is done during the
   development of a new protocol document, it may be necessary to make
   provisional assignments.  They may get changed, revised, or withdrawn
   during the development of a new standard.  These provisional
   assignments are marked with a status of "unstable", so that they can
   be removed and the SID number possibly reassigned for a different
   YANG schema name/path later in the development process.  When the
   specification is advanced to a final document, the assignment is
   marked with a status of "stable".  During a period of development
   starting from a published specification, two variants of the ".sid"
   file should be made available by the tooling involved in that
   development: (1) a "published" ".sid" file with the existing stable
   SID assignments only (which the development effort should keep
   stable), as well as (2) an "unpublished" ".sid" file that also
   contains the unstable SID assignments.

   Registration of the ".sid" file associated with a YANG module is
   optional but recommended, in order to recommended; doing so would promote interoperability
   between devices and to avoid duplicate allocation of SIDs to a single
   YANG module.  Different registries might have different requirements
   for the registration and publication of the ".sid" files.  For a
   diagram of one possible scenario, please refer to the activity
   diagram shown in Figure 4 in Appendix C.

   Each time a YANG module, one or more of its imported modules, or one
   or more of its included submodules are updated, a new ".sid" file MAY
   be created if the new or updated items will need SIDs.  All the SIDs
   present in the previous version of the ".sid" file MUST be present in
   the new version as well.  The creation of this new version of the
   ".sid" file SHOULD be performed using an automated tool.

   If a new revision requires more SIDs than initially allocated, a new
   SID range MUST be added to the 'assignment-range' item as defined in
   Section 4.  These extra SIDs are used for subsequent assignments.

   For an example of this update process, see the activity diagram shown
   in Figure 5 in Appendix C.

4.  ".sid" File Format

   ".sid" files are used to persist and publish SIDs assigned to the
   different YANG items in a specific YANG module.

   The following tree diagram [RFC8340] [BCP215] provides an overview of the data
   model:

   module: ietf-sid-file

     structure sid-file:
       +-- module-name            yang:yang-identifier
       +-- module-revision?       revision-identifier
       +-- sid-file-version?      sid-file-version-identifier
       +-- sid-file-status?       enumeration
       +-- description?           string
       +-- dependency-revision*   [module-name]
       |  +-- module-name         yang:yang-identifier
       |  +-- module-revision     revision-identifier
       +-- assignment-range*      [entry-point]
       |  +-- entry-point         sid
       |  +-- size                uint64
       +-- item* [namespace       identifier]
          +-- status?             enumeration
          +-- namespace           enumeration
          +-- identifier          union
          +-- sid                 sid

                  Figure 1: YANG Tree for 'ietf-sid-file'

5.  ".sid" File YANG Module

   The following YANG module defines the structure of this file. ".sid" files.
   Encoding is performed in JSON [RFC8259] [STD90] using the rules defined in
   [RFC7951].  This module imports 'ietf-yang-types' [RFC6991] and
   'ietf-yang-structure-ext' [RFC8791].  It also references [RFC7950] [STD68],
   [RFC7950], and [RFC8407]. [BCP216].

   <CODE BEGINS> file "ietf-sid-file@2024-06-17.yang"
   module ietf-sid-file {
     yang-version 1.1;
     namespace "urn:ietf:params:xml:ns:yang:ietf-sid-file";
     prefix sid;

     import ietf-yang-types {
       prefix yang;
       reference
         "RFC 6991: Common YANG Data Types";
     }
     import ietf-yang-structure-ext {
       prefix sx;
       reference
         "RFC 8791: YANG Data Structure Extensions";
     }

     organization
       "IETF CORE Working Group";

     contact
       "WG Web:   <https://datatracker.ietf.org/wg/core/>

        WG List:  <mailto:core@ietf.org>

        Editor:   Michel Veillette
                  <mailto:michel.veillette@trilliant.com>

        Editor:   Andy Bierman
                  <mailto:andy@yumaworks.com>

        Editor:   Alexander Pelov
                  <mailto:a@ackl.io>
                  <mailto:alexander.pelov@imt-atlantique.fr>

        Editor:   Ivaylo Petrov
                  <mailto:ivaylopetrov@google.com>";

     description
       "This module defines the structure of the '.sid' files.

        Each '.sid' file contains the mapping between each
        string identifier defined by a YANG module and a
        corresponding numeric value called a YANG-SID.

        The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
        NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
        'MAY', and 'OPTIONAL' in this document are to be interpreted as
        described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
        they appear in all capitals, as shown here.

        Copyright (c) 2024 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject to
        the license terms contained in, the Revised BSD License set
        forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (https://trustee.ietf.org/license-info).";
        (https://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 9595; see
        the RFC itself for full legal notices.";

     revision 2024-06-17 {
       description
         "Initial revision.";
       reference
         "RFC 9595: YANG Data Model for YANG Schema Item iDentifiers
                    (YANG-SIDs)";
     }

     typedef revision-identifier {
       type string {
         pattern '[0-9]{4}-[0-9]{2}-[0-9]{2}';
       }
       description
         "Represents a date in YYYY-MM-DD format.";
     }

     typedef sid-file-version-identifier {
       type uint32;
       description
         "Represents the version of a '.sid' file.";
     }

     typedef sid {
       type uint64 {
         range "0..9223372036854775807";
       }
       description
         "YANG Schema Item iDentifier.";
       reference
         "RFC 9595: YANG Data Model for YANG Schema Item iDentifiers
                    (YANG-SIDs)";
     }

     typedef schema-node-path {
       type string {
         pattern
           '/[a-zA-Z_][a-zA-Z0-9\-_.]*:[a-zA-Z_][a-zA-Z0-9\-_.]*' +
           '(/[a-zA-Z_][a-zA-Z0-9\-_.]*(:[a-zA-Z_][a-zA-Z0-9\-_.]*)?)*';
       }
       description
         "A schema-node path is an absolute YANG schema-node
          identifier as defined by the YANG ABNF rule
          'absolute-schema-nodeid', except that module names are used
          instead of prefixes.

          This string additionally follows the following rules:

          -  The leftmost (top-level) data node name is always in the
             namespace-qualified form.
          -  Any subsequent schema-node name is in the
             namespace-qualified form if the node is defined in a
             module other than its parent node.  Otherwise, the
             simple form is used.  No predicates are allowed.";
       reference
         "RFC 5234 (STD 68): Augmented BNF for Syntax Specifications:
                             ABNF
          RFC 7950: The YANG 1.1 Data Modeling Language,
                    Section 6.5: Schema Node Identifier";
     }

     sx:structure sid-file {
       uses sid-file-contents;
     }

     grouping sid-file {
       description
         "A grouping that contains a YANG container
          representing the file structure of a '.sid' file.";

       container sid-file {
         description
           "A wrapper container that together with the 'sx:structure'
            extension marks the YANG data structures inside as not
            being intended to be implemented as part of a
            configuration datastore or as an operational state within
            the server.";
         uses sid-file-contents;
       }
     }

     grouping sid-file-contents {
       description
         "A grouping that defines the contents of a container that
          represents the file structure of a '.sid' file.";

       leaf module-name {
         type yang:yang-identifier;
         mandatory true;
         description
           "Name of the YANG module associated with this
            '.sid' file.";
       }

       leaf module-revision {
         type revision-identifier;
         description
           "Revision of the YANG module associated with this '.sid'
            file.
            This leaf is not present if no revision statement is
            defined in the YANG module.";
       }

       leaf sid-file-version {
         type sid-file-version-identifier;
         default "0";
         description
           "Optional leaf that specifies the version number of the
            '.sid' file.  '.sid' files and the version sequence are
            specific to a given YANG module revision.  This number
            starts at zero when there is a new YANG module revision
            and increases monotonically.  This number can distinguish
            updates to the '.sid' file that are - for instance, as the result
            of new processing or reported errata.";
       }

       leaf sid-file-status {
         type enumeration {
           enum unpublished {
             description
               "This '.sid' file is unpublished (RFC 8407) (BCP 216) and is
                also called a work-in-progress or workfile.
                This may be when it accompanies an unpublished YANG
                module or when only the '.sid' file itself is
                unpublished.
                The 'item' list MAY contain entries with a status
                value of 'unstable'.";
             reference
               "RFC 8407: 8407 (BCP 216): Guidelines for Authors and
                                    Reviewers of Documents Containing
                                    YANG Data Models";
           }
           enum published {
             description
               "This '.sid' file is published, published.  This status
                applies to '.sid' files for a published YANG
                module. modules.
                The 'item' list MUST NOT contain entries with a
                status value of 'unstable'.";
           }
         }
         default "published";
         description
           "Optional leaf that specifies the status of the
            '.sid' file.";
       }

       leaf description {
         type string;
         description
           "Free-form meta-information about the generated file.  It
            might include a '.sid' file generation tool and time,
            among other things.";
       }

       list dependency-revision {
         key "module-name";

         description
           "Information about the revision used during the
            '.sid' file generation of each dependency, i.e., each
            YANG module that the YANG module in 'module-name' associated with this
            '.sid' file imported.";

         leaf module-name {
           type yang:yang-identifier;
           description
             "Name of the YANG module, dependency
             "YANG module name of 'module-name',
              for which revision information is provided."; this dependency.";
         }
         leaf module-revision {
           type revision-identifier;
           mandatory true;
           description
             "Revision of the YANG module, dependency module of
              'module-name', for which revision information is
              provided."; this dependency.";
         }
       }

       list assignment-range {
         key "entry-point";
         description
           "YANG-SID Range(s) allocated to the YANG module
            identified by 'module-name' and 'module-revision'.

            -  The first available value in the YANG-SID Range is
               'entry-point', and the last available value in the
               range is ('entry-point' + size - 1).
            -  The YANG-SID Ranges specified by all
               'assignment-range' entries MUST NOT overlap.";

         leaf entry-point {
           type sid;
           description
             "Lowest YANG-SID available for assignment.";
         }

         leaf size {
           type uint64;
           mandatory true;
           description
             "Number of YANG-SIDs available for assignment.";
         }
       }

       list item {
         key "namespace identifier";
         unique "sid";

         description
           "Each entry within this list defines the mapping between
            a YANG item string identifier and a YANG-SID.  This list
            MUST include a mapping entry for each YANG item defined
            by the YANG module identified by 'module-name' and
            'module-revision'.";

         leaf status {
           type enumeration {
             enum stable {
               value 0;
               description
                 "This SID allocation has been published as the
                  stable allocation for the given namespace and
                  identifier.";
             }
             enum unstable {
               value 1;
               description
                 "This SID allocation has been done during a
                  development process; it is not yet stable.";
             }
             enum obsolete {
               value 2;
               description
                 "This SID allocation is no longer in use.  It is
                  recorded to avoid reallocation of its SID value.";
             }
           }
           default "stable";
           description
             "The status field contains information about the
              stability of the allocation.  For each specific SID
              value, over time it can only transition from
              'unstable' to 'stable', and possibly from 'stable' to
              'obsolete'.";
         }

         leaf namespace {
           type enumeration {
             enum module {
               value 0;
               description
                 "All module and submodule names share the same
                  global module identifier namespace.";
             }
             enum identity {
               value 1;
               description
                 "All identity names defined in a module and its
                  submodules share the same identity identifier
                  namespace.";
             }
             enum feature {
               value 2;
               description
                 "All feature names defined in a module and its
                  submodules share the same feature identifier
                  namespace.";
             }
             enum data {
               value 3;
               description
                 "The namespace for all data nodes, as defined in
                  YANG.";
               reference
                 "RFC 7950: The YANG 1.1 Data Modeling Language";
             }
           }
           description
             "Namespace of the YANG item for this mapping entry.";
         }

         leaf identifier {
           type union {
             type yang:yang-identifier;
             type schema-node-path;
           }
           description
             "String identifier of the YANG item for this mapping
              entry.

              If the corresponding 'namespace' field is 'module',
              'feature', or 'identity', then this field MUST
              contain a valid YANG identifier string.

              If the corresponding 'namespace' field is 'data',
              then this field MUST contain a valid schema-node
              path.";
         }

         leaf sid {
           type sid;
           mandatory true;
           description
             "YANG-SID assigned to the YANG item for this mapping
              entry.";
         }
       }
     }
   }
   <CODE ENDS>

                   Figure 2: YANG Module 'ietf-sid-file'

6.

5.  Security Considerations

   This document defines a new type of identifier used to encode data
   that are modeled in YANG [RFC7950].  This new identifier maps
   semantic concepts to integers, and if the source of this mapping is
   not trusted, then new security risks might occur if an attacker can
   control the mapping.

   At the time of writing, it is expected that the ".sid" files will be
   processed by a software developer, within a software development
   environment.  Developers are advised to only import ".sid" files from
   authoritative sources.  IANA is the authoritative source for IETF-
   managed YANG modules.

   Conceptually, ".sid" files could be processed by less-constrained
   target systems such as network management systems.  Such systems need
   to take extra care to make sure that they are only processing ".sid"
   files from authoritative sources that are as authoritative as the
   YANG modules that they are using.

   ".sid" files are identified with and can employ _dereferenceable
   identifiers_, i.e., identifiers that could lead implementations in
   certain situations to automatically perform remote access, the target
   of which is indicated at least partially by those identifiers.  This
   can give an attacker information from and/or control over such
   accesses, which can have security and privacy implications.  Please
   also see Sections 6 and 7 of [DEREF-ID] for further considerations
   that may be applicable.

7.

6.  IANA Considerations

7.1.

6.1.  YANG Namespace Registration

   This document registers the following XML namespace URN in the "IETF
   XML Registry", following the format defined in [RFC3688]: [BCP81]:

   URI:  urn:ietf:params:xml:ns:yang:ietf-sid-file
   Registrant Contact:  The IESG.
   XML:  N/A; the requested URI is an XML namespace.
   Reference:  RFC 9595

7.2.

6.2.  ".sid" File Format Module Registration

   This document registers one YANG module in the "YANG Module Names"
   registry [RFC6020]:

   Name:  ietf-sid-file
   Namespace:  urn:ietf:params:xml:ns:yang:ietf-sid-file
   Prefix:  sid
   Reference:  RFC 9595

7.3.

6.3.  New IANA Registry: YANG-SID Mega-Ranges

   The name of this registry is "YANG-SID Mega-Ranges".  This registry
   is used to record the delegation of the management of a block of SIDs
   to third parties (such as Standards Development Organizations (SDOs)
   or registrars).

7.3.1.

6.3.1.  Structure

   Each entry in this registry must include:

   *  The entry point (first SID) of the registered SID block.

   *  The size of the registered SID block.  The size SHOULD be one
      million (1,000,000) SIDs, but in exceptional cases, it MAY be a
      multiple of 1,000,000.

   *  The policy of SID range allocations: Public, Private, or both.

   *  The contact information of the requesting organization, including
      the following:

      -  Organization name.

      -  URL.

7.3.2.

6.3.2.  Allocation Policy

   The IANA policy for future additions to this registry is "Expert
   Review" [RFC8126]. [BCP26].

   An organization requesting to manage a YANG-SID Range (and thus have
   an entry in the "YANG-SID Mega-Ranges" registry) must ensure the
   following capacities:

   *  The capacity to manage and operate a registry of YANG-SID Ranges.
      A registry of YANG-SID Ranges MUST provide the following
      information for all YANG-SID Ranges allocated by the registry:

      -  The entry point of the allocated YANG-SID Range.

      -  The size of the allocated YANG-SID Range.

      -  Type: Public or Private.

         o  Public ranges MUST include at least a reference to the YANG
            module and ".sid" files for that YANG-SID Range (e.g.,
            compare see
            Section 7.4.3 6.4.3 as an example for how this is handled for the
            "IETF YANG-SID Modules" Ranges" registry).

         o  Private ranges MUST be marked as "Private".

   *  A policy of allocation, which clearly identifies whether the YANG-
      SID Range allocations would be Private, Public, or both.

   *  Technical capacity to provide or refer to ".sid" files in a way
      that meets the security objective of data integrity for these
      files (see also Section 6). 5).

   *  Technical capacity to ensure the sustained operation of the
      registry for a period of at least 5 years.  If registrations in
      the Private category are allowed, the period must be at least 10
      years.

   If a size of the allocation beyond 1,000,000 is desired, the
   organization must demonstrate the sustainability of the technical
   approach for utilizing this size of allocation and how it does not
   negatively impact the overall usability of the SID allocation
   mechanisms; such allocations are preferably placed in the space above
   4,295,000,000 (64-bit space).

7.3.2.1.

6.3.2.1.  First Allocation

   For a first allocation to be provided, the requesting organization
   must demonstrate a functional registry infrastructure.

7.3.2.2.

6.3.2.2.  Consecutive Allocations

   On one or more subsequent allocation requests, the organization must
   demonstrate the exhaustion of the prior range.  These conditions need
   to be asserted by the assigned expert(s).

   If such a request for an additional allocation is made within 3 years
   of the last allocation, the experts need to discuss this request on
   the CORE Working Group mailing list and consensus needs to be
   obtained before allocating a new Mega-Range.

7.3.3.

6.3.3.  Initial Contents of the Registry

   This registry contains the following initial entry:

   +=====+=========+==========+============+=========================+
   |Entry|Size     |Allocation|Organization| URL                     |
   |Point|         |          |Name        |                         |
   +=====+=========+==========+============+=========================+
   |0    |1,000,000|Public    |IANA        | <https://www.iana.org/> |
   +-----+---------+----------+------------+-------------------------+

        Table 2: YANG-SID Mega-Ranges Registry: Initial Assignment

7.4.

6.4.  New IANA Registry: IETF YANG-SID Ranges

7.4.1.

   The name of this registry is "IETF YANG-SID Ranges".  This registry
   is used to record information related to the assignment of SID Ranges
   (e.g., entry point and size) to YANG modules identified by module
   name.

6.4.1.  Structure

   Each entry in this registry must include:

   *  The SID range entry point.

   *  The SID range size.

   *  The YANG module name.

   *  A document reference (the document making the registration).

7.4.2.

6.4.2.  Allocation Policy

   The first million SIDs assigned to IANA is are subdivided as follows:

   *  The range of 0 to 999 (size 1,000) is subject to "IESG Approval"
      as defined in [RFC8126]; [BCP26]; of these, SID value 0 has been reserved for
      implementations to internally signify the absence of a SID number
      and does not occur in interchange.

   *  The ranges of 1,000 to 59,999 (size 59,000) and 100,000 to 299,999
      (size 200,000) are designated for YANG modules defined in RFCs.

      -  The IANA policy for additions to this registry is:

         o

         1.  "Expert Review" [RFC8126] [BCP26] if the ".sid" file comes from a
             YANG module from an existing RFC.

         o

         2.  "RFC Required" [RFC8126] [BCP26] otherwise.

      -  The expert MUST verify that the YANG module for which this
         allocation is made has an RFC (existing RFC) OR is on track to
         become an RFC (Early Allocation with a request from the working
         group chairs as defined by [BCP100]).

   *  The range of 60,000 to 99,999 (size 40,000) is reserved for
      experimental YANG modules.  This range MUST NOT be used in
      operational deployments, since these SIDs are not globally unique
      and their interoperability is therefore limited.  The IANA policy
      for this range is "Experimental Use" [RFC8126]. [BCP26].

   *  The range of 300,000 to 999,999 (size 700,000) is "Reserved" as
      defined in [RFC8126].

   +=============+=========+==========================+ [BCP26].

   +=============+=========+=================================+
   | Entry Point | Size    | IANA Policy                     |
   +=============+=========+==========================+
   +=============+=========+=================================+
   | 0           | 1,000   | IESG Approval                   |
   +-------------+---------+--------------------------+
   +-------------+---------+---------------------------------+
   | 1,000       | 59,000  | RFC Required (see item 2 above) |
   +-------------+---------+--------------------------+
   +-------------+---------+---------------------------------+
   | 60,000      | 40,000  | Experimental/Private Reserved for Experimental Use   |
   +-------------+---------+--------------------------+
   +-------------+---------+---------------------------------+
   | 100,000     | 200,000 | RFC Required (see item 2 above) |
   +-------------+---------+--------------------------+
   +-------------+---------+---------------------------------+
   | 300,000     | 700,000 | Reserved                        |
   +-------------+---------+--------------------------+
   +-------------+---------+---------------------------------+

       Table 3: IETF YANG-SID Ranges Registry: Policies for
                           IETF Ranges

   The size of the SID range allocated for a YANG module is recommended
   to be a multiple of 50 and to be at least 33% above the current
   number of YANG items.  This headroom allows assignments within the
   same range of new YANG items introduced by subsequent revisions.  The
   SID range size SHOULD NOT exceed 1,000; a larger size may be
   requested by the authors if this recommendation is considered
   insufficient.  It is important to note that an additional SID range
   can be allocated to an existing YANG module if the initial range is
   exhausted; this then just leads to a slightly less efficient
   representation.

   If a SID range is allocated for an existing RFC through the "Expert
   Review" policy, the Reference field for the given allocation should
   point to the RFC that the YANG module is defined in.

   If a SID range is required before publishing the RFC due to
   implementations needing stable SID values, Early Allocation as
   defined in [BCP100] can be employed for the "RFC Required" range
   (Section 2 of RFC 7120 [BCP100]).

7.4.3.

6.4.3.  Publication of the ".sid" File

   During an RFC's publication process, IANA contacts the designated
   expert team ("the team"), who are responsible for delivering a final
   ".sid" file for each module defined by the RFC.  For a type-3
   developer (SID-oblivious; see Section 2.4), the team creates a new
   ".sid" file from each YANG module; see below.  For a type-2 (SID-
   aware) developer, the team first obtains the existing draft ".sid"
   file from a stable reference in the approved draft; for a type-1
   (SID-guiding) developer, the team extracts the ".sid" file from the
   approved draft.

   The team uses a tool to generate a final ".sid" file from each YANG
   module; the final ".sid" file has all SID assignments set to "stable"
   and the ".sid" file status set to "published".  A published ".sid"
   file MUST NOT contain SID assignments with a status of "unstable".

   For the cases other than type-3 (SID-oblivious), the team feeds the
   existing draft ".sid" file as an input ("reference ".sid" file") to
   the tool so that the changes resulting from regeneration are minimal.
   For YANG modules that are revisions of previously published modules,
   any existing published ".sid" file needs to serve as a reference
   ".sid" file for the tool, during generation of either the revised
   draft ".sid" file (type-1, type-2) or the final ".sid" file (type-3).

   In any case, the team checks the generated file, including checking
   for validity as a ".sid" file, for consistency with the SID range
   allocations, for full coverage of the YANG items in the YANG module,
   and for the best achievable consistency with the existing draft
   ".sid" file.

   The designated experts then give the ".sid" file to IANA to publish
   in the "IETF YANG-SID Modules" registry (Section 7.5) 6.5) along with the
   YANG module.

   The ".sid" file MUST NOT be published as part of the RFC: the IANA
   registry is authoritative, and a link to it is to be inserted in the
   RFC.  (Note that the present RFC is an exception to this rule, as the
   ".sid" file also serves as an example for exposition.)  RFCs that
   need SIDs assigned to their new modules for use in the text of the
   document, e.g., for examples, need to alert the RFC Editor in the
   draft text that this is the case.  Such RFCs cannot be produced by
   type-3 (SID-oblivious) developers: the SIDs used in the text need to
   be assigned in the existing draft ".sid" file, and the designated
   expert team needs to check that the assignments in the final ".sid"
   file are consistent with the usage in the RFC text or that the
   approved draft text is changed appropriately.

7.4.4.

6.4.4.  Initial Contents of the Registry

   Initial entries in this registry are as follows:

   +=====+====+================================+=====================+
   |Entry|Size|Module Name                     |Reference            |
   |Point|    |                                |                     |
   +=====+====+================================+=====================+
   |    0|   1|(Reserved: not a valid SID)     |RFC 9595             |
   +-----+----+--------------------------------+---------------------+
   |1,000| 100|ietf-coreconf                   |[CORE-COMI]          |                   |RFC 9595, [CORE-COMI]|
   +-----+----+--------------------------------+---------------------+
   |1,100|  50|ietf-yang-types                 |[RFC6991]            |
   +-----+----+--------------------------------+---------------------+
   |1,150|  50|ietf-inet-types                 |[RFC6991]            |
   +-----+----+--------------------------------+---------------------+
   |1,200|  50|iana-crypt-hash                 |[RFC7317]            |
   +-----+----+--------------------------------+---------------------+
   |1,250|  50|ietf-netconf-acm                |[RFC8341]                |[STD91]              |
   +-----+----+--------------------------------+---------------------+
   |1,300|  50|ietf-sid-file                   |RFC 9595             |
   +-----+----+--------------------------------+---------------------+
   |1,500| 100|ietf-interfaces                 |[RFC8343]            |
   +-----+----+--------------------------------+---------------------+
   |1,600| 100|ietf-ip                         |[RFC8344]            |
   +-----+----+--------------------------------+---------------------+
   |1,700| 100|ietf-system                     |[RFC7317]            |
   +-----+----+--------------------------------+---------------------+
   |1,800| 400|iana-if-type                    |[RFC7224]            |
   +-----+----+--------------------------------+---------------------+
   |2,400|  50|ietf-voucher                    |[RFC8366]            |
   +-----+----+--------------------------------+---------------------+
   |2,450|  50|ietf-constrained-voucher        |[CONSTRAINED-VOUCHER]|
   +-----+----+--------------------------------+---------------------+
   |2,500|  50|ietf-constrained-voucher-request|[CONSTRAINED-VOUCHER]|
   +-----+----+--------------------------------+---------------------+

    Table 4: IETF YANG-SID Ranges Registry: Initial Range Assignments

   For allocation, RFC publication of the YANG module is required as per
   [RFC8126].
   the "RFC Required" policy defined in Section 4.7 of RFC 8126 [BCP26].
   The YANG module must be registered in the "YANG Module Names"
   registry according to the rules specified in Section 14 of [RFC6020].

7.5.

6.5.  New IANA Registry: IETF YANG-SID Modules

   The name of this registry is "IETF YANG-SID Modules".  This registry
   is used to record the allocation of SIDs for individual YANG module
   items.

7.5.1.

6.5.1.  Structure

   Each entry in this registry must include:

   *  The YANG module name.  This module name must be present in the
      "Name" column of the "YANG Module Names" registry.

   *  A URI for the associated ".yang" file.  This file link must be
      present in the "File" column of the "YANG Module Names" registry.

   *  The URI for the ".sid" file that defines the allocation.  The
      ".sid" file is stored by IANA.

   *  The number of actually allocated SIDs in the ".sid" file.

7.5.2.

6.5.2.  Allocation Policy

   The allocation policy is "Expert Review" [RFC8126]. [BCP26].  The expert MUST
   ensure that the following conditions are met:

   *  The ".sid" file has a valid structure:

      -  The ".sid" file MUST be a valid JSON file following the
         structure of the module defined in this document.

   *  The ".sid" file allocates individual SIDs ONLY in the YANG-SID
      Ranges for this YANG module (as allocated in the "IETF YANG-SID
      Ranges" registry):

      -  All SIDs in this ".sid" file MUST be within the ranges
         allocated to this YANG module in the "IETF YANG-SID Ranges"
         registry.

   *  If another ".sid" file has already allocated SIDs for this YANG
      module (e.g., for older or newer versions of the YANG module), the
      YANG items are assigned the same SIDs as those in the other ".sid"
      file.

   *  If there is an older version of the ".sid" file, all allocated
      SIDs from that version are still present in the current version of
      the ".sid" file.

7.5.3.

6.5.3.  Recursive Allocation of YANG-SID Range YANG-SIDs at Document Adoption

   Due to the difficulty in changing SID values during IETF document
   processing, it is expected that most documents will ask for SID range
   allocations using Early Allocations [BCP100].  The details of the
   Early Allocation to be requested, including the timeline envisioned,
   should be included in any working group adoption call.  Prior to
   working group adoption, an Internet-Draft author can use the
   experimental SID range (as per Section 7.4.2) 6.4.2) for their SID
   allocations or other values that do not create ambiguity with other
   SID uses (for example, they can use ranges and SIDs registered in a range
   non-IANA-managed registry that comes from is based on a non-
   IANA-managed registry of YANG-SID Mega-Ranges). mega-range
   assignment).

   After working group adoption, any modification of a ".sid" file is
   expected to be discussed on the mailing lists of the appropriate
   working groups.  Specific attention should be paid to implementers'
   opinions after Working Group Last Call if a SID value is to change
   its meaning.  In all cases, a ".sid" file and the SIDs associated
   with it are subject to change before the publication of an Internet-
   Draft as an RFC.

   As new the concept of SIDs are is first used, many existing, previously
   published YANG modules will not have SID allocations.  For an
   allocation to be useful, the included YANG modules may also need to
   have SID allocations made, in a process that will generally be
   analogous to that in Section 7.4.3 6.4.3 for the type-3 (SID-oblivious)
   case.

   The expert reviewer who performs the (Early) Allocation analysis will
   need to go through the list of included YANG modules and perform SID
   allocations for those modules as well.

   *  If the document is a published RFC, then the allocation of SIDs
      for its referenced YANG modules is permanent.  The expert reviewer
      provides the generated ".sid" file to IANA for registration.

   *  If the document is an unprocessed Internet-Draft adopted in a
      working group, then an Early Allocation is performed for this
      document as well.  Early Allocations require approval by an IESG
      area director.  An Early Allocation that requires additional
      allocations will list the other allocations in its description and
      will be cross-posted to the mailing lists of any other working
      groups concerned.

   *  A YANG module that references a module in a document that has not
      yet been adopted by any working group will be unable to perform an
      Early Allocation for that other document until it is adopted by a
      working group.  As described in Section 3 of RFC 7120 [BCP100], an AD-sponsored document
      acts as if it had a
      shepherding AD will stand in for the working group.  The approving group chairs if the
      document is not the product of an IETF working group, effectively
      allowing the AD may also to exempt a document from this policy by agreeing to AD-sponsor the
      document. policy.

   At the end of the IETF process, all the dependencies of a given
   module for which SIDs are assigned should also have SIDs assigned.
   Those dependencies' assignments should be permanent (not Early
   Allocation).

   A previously SID-allocated YANG module that changes its references to
   include a YANG module for which there is no SID allocation needs to
   repeat the Early Allocation process.

   [BCP100] defines a time limit for the validity of Early Allocations,
   after which they expire unless they are renewed.  Section 3.3 of RFC
   7120 [BCP100] also says:

   |  Note that if a document is submitted for review to the IESG, and
   |  at the time of submission some Early Allocations are valid (not
   |  expired), these allocations must not be considered to have expired
   |  while the document is under IESG consideration or is awaiting
   |  publication in the RFC Editor's queue after approval by the IESG.

7.5.4.

6.5.4.  Initial Contents of the Registry

   At the time of writing, this registry does not contain any entries.

7.6.

6.6.  Media Type and Content-Format Registration

7.6.1.

6.6.1.  Media Type application/yang-sid+json

   This document adds the following media type to the "Media Types"
   registry.

   +===============+===========================+===========+
   | Name          | Template                  | Reference |
   +===============+===========================+===========+
   | yang-sid+json | application/yang-sid+json | RFC 9595  |
   +---------------+---------------------------+-----------+

          Table 5: ".sid" File Media Type Registration

   Type name:  application

   Subtype name:  yang-sid+json

   Required parameters:  N/A

   Optional parameters:  N/A

   Encoding considerations:  binary (UTF-8)

   Security considerations:  See Section 6 5 of RFC 9595.

   Published specification:  RFC 9595

   Applications that use this media type:  Applications that need to
      obtain YANG-SIDs to interchange YANG-modeled data in a concise and
      efficient representation.

   Fragment identifier considerations:  The syntax and semantics of
      fragment identifiers specified for "application/yang-sid+json" is
      as specified for "application/json".  (At publication of this
      document, there is no fragment identification syntax defined for
      "application/json".)

   Additional information:

      Magic number(s):  N/A
      File extension(s):  .sid
      Macintosh file type code(s):  N/A

   Person & email address to contact for further information:  CORE WG
      mailing list (core@ietf.org) or IETF Applications and Real-Time
      Area (art@ietf.org)

   Intended usage:  COMMON

   Restrictions on usage:  none

   Author/Change controller:  IETF

7.6.2.

6.6.2.  CoAP Content-Format

   This document adds the following Content-Format to the "CoAP Content-
   Formats" registry within the "Constrained RESTful Environments (CoRE)
   Parameters" group of registries, where 260 has been assigned from the
   "IETF Review" (256-9,999) range.

   +===========================+================+=====+===========+
   | Content Type              | Content Coding | ID  | Reference |
   +===========================+================+=====+===========+
   | application/yang-sid+json | -              | 260 | RFC 9595  |
   +---------------------------+----------------+-----+-----------+

           Table 6: ".sid" File Content-Format Registration

8.

7.  References

8.1.

7.1.  Normative References

   [BCP100]   Best Current Practice 100,
              <https://www.rfc-editor.org/info/bcp100>.
              At the time of writing, this BCP comprises the following:

              Cotton, M., "Early IANA Allocation of Standards Track Code
              Points", BCP 100, RFC 7120, DOI 10.17487/RFC7120, January
              2014, <https://www.rfc-editor.org/info/rfc7120>.

   [RFC2119]

   [BCP14]    Best Current Practice 14,
              <https://www.rfc-editor.org/info/bcp14>.
              At the time of writing, this BCP comprises the following:

              Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3688]

              Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [BCP81]    Best Current Practice 81,
              <https://www.rfc-editor.org/info/bcp81>.
              At the time of writing, this BCP comprises the following:

              Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC6991]  Schoenwaelder, J., Ed., "Common YANG Data Types",
              RFC 6991, DOI 10.17487/RFC6991, July 2013,
              <https://www.rfc-editor.org/info/rfc6991>.

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC7951]  Lhotka, L., "JSON Encoding of Data Modeled with YANG",
              RFC 7951, DOI 10.17487/RFC7951, August 2016,
              <https://www.rfc-editor.org/info/rfc7951>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/info/rfc8040>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in

   [RFC8791]  Bierman, A., Björklund, M., and K. Watsen, "YANG Data
              Structure Extensions", RFC
              2119 Key Words", BCP 14, 8791, DOI 10.17487/RFC8791,
              June 2020, <https://www.rfc-editor.org/info/rfc8791>.

   [STD68]    Internet Standard 68,
              <https://www.rfc-editor.org/info/std68>.
              At the time of writing, this STD comprises the following:

              Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 8174, 5234,
              DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8259] 10.17487/RFC5234, January 2008,
              <https://www.rfc-editor.org/info/rfc5234>.

   [STD90]    Internet Standard 90,
              <https://www.rfc-editor.org/info/std90>.
              At the time of writing, this STD comprises the following:

              Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
              Interchange Format", STD 90, RFC 8259,
              DOI 10.17487/RFC8259, December 2017,
              <https://www.rfc-editor.org/info/rfc8259>.

   [RFC8341]  Bierman, A. and M.

7.2.  Informative References

   [BCP215]   Best Current Practice 215,
              <https://www.rfc-editor.org/info/bcp215>.
              At the time of writing, this BCP comprises the following:

              Bjorklund, "Network Configuration
              Access Control Model", STD 91, M. and L. Berger, Ed., "YANG Tree Diagrams",
              BCP 215, RFC 8341, 8340, DOI 10.17487/RFC8341, 10.17487/RFC8340, March 2018,
              <https://www.rfc-editor.org/info/rfc8341>.

   [RFC8791]
              <https://www.rfc-editor.org/info/rfc8340>.

   [BCP216]   Best Current Practice 216,
              <https://www.rfc-editor.org/info/bcp216>.
              At the time of writing, this BCP comprises the following:

              Bierman, A., Björklund, M., "Guidelines for Authors and K. Watsen, "YANG Reviewers of
              Documents Containing YANG Data
              Structure Extensions", Models", BCP 216, RFC 8791, 8407,
              DOI 10.17487/RFC8791, 10.17487/RFC8407, October 2018,
              <https://www.rfc-editor.org/info/rfc8407>.

   [BCP26]    Best Current Practice 26,
              <https://www.rfc-editor.org/info/bcp26>.
              At the time of writing, this BCP comprises the following:

              Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2020, <https://www.rfc-editor.org/info/rfc8791>.

8.2.  Informative References 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [CONSTRAINED-VOUCHER]
              Richardson, M., van der Stok, P., Kampanakis, P., and E.
              Dijk, "Constrained Bootstrapping Remote Secure Key
              Infrastructure (cBRSKI)", Work in Progress, Internet-
              Draft, draft-ietf-anima-constrained-voucher-24, 3 March
              2024, <https://datatracker.ietf.org/doc/html/draft-ietf-
              anima-constrained-voucher-24>.

   [CORE-COMI]
              Veillette, M. V., Ed., van der Stok, P., Ed., Pelov, A.,
              Ed., Bierman, A., and C. Bormann, Ed., "CoAP Management
              Interface (CORECONF)", Work in Progress, Internet-Draft,
              draft-ietf-core-comi-17, 4 March 2024,
              <https://datatracker.ietf.org/doc/html/draft-ietf-core-
              comi-17>.

   [DEREF-ID] Bormann, C. and C. Amsüss, "The 'dereferenceable
              identifier' pattern", Work in Progress, Internet-Draft,
              draft-bormann-t2trg-deref-id-03, 2 March 2024,
              <https://datatracker.ietf.org/doc/html/draft-bormann-
              t2trg-deref-id-03>.

   [PYANG]    Björklund, M., "An extensible YANG validator and converter
              in python", commit 25f69e8, March 2024,
              <https://github.com/mbj4668/pyang>.

   [RFC6020]  Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <https://www.rfc-editor.org/info/rfc6020>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC7224]  Bjorklund, M., "IANA Interface Type YANG Module",
              RFC 7224, DOI 10.17487/RFC7224, May 2014,
              <https://www.rfc-editor.org/info/rfc7224>.

   [RFC7228]  Bormann, C., Ersue, M., and A. Keranen, "Terminology for
              Constrained-Node Networks", RFC 7228,
              DOI 10.17487/RFC7228, May 2014,
              <https://www.rfc-editor.org/info/rfc7228>.

   [RFC7317]  Bierman, A. and M. Bjorklund, "A YANG Data Model for
              System Management", RFC 7317, DOI 10.17487/RFC7317, August
              2014, <https://www.rfc-editor.org/info/rfc7317>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8340]  Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
              BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
              <https://www.rfc-editor.org/info/rfc8340>.

   [RFC8343]  Bjorklund, M., "A YANG Data Model for Interface
              Management", RFC 8343, DOI 10.17487/RFC8343, March 2018,
              <https://www.rfc-editor.org/info/rfc8343>.

   [RFC8344]  Bjorklund, M., "A YANG Data Model for IP Management",
              RFC 8344, DOI 10.17487/RFC8344, March 2018,
              <https://www.rfc-editor.org/info/rfc8344>.

   [RFC8366]  Watsen, K., Richardson, M., Pritikin, M., and T. Eckert,
              "A Voucher Artifact for Bootstrapping Protocols",
              RFC 8366, DOI 10.17487/RFC8366, May 2018,
              <https://www.rfc-editor.org/info/rfc8366>.

   [RFC8407]  Bierman, A., "Guidelines for Authors and Reviewers of
              Documents Containing YANG Data Models", BCP 216, RFC 8407,
              DOI 10.17487/RFC8407, October 2018,
              <https://www.rfc-editor.org/info/rfc8407>.

   [RFC8792]  Watsen, K., Auerswald, E., Farrel, A., and Q. Wu,
              "Handling Long Lines in Content of Internet-Drafts and
              RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020,
              <https://www.rfc-editor.org/info/rfc8792>.

   [RFC9195]  Lengyel, B. and B. Claise, "A File Format for YANG
              Instance Data", RFC 9195, DOI 10.17487/RFC9195, February
              2022, <https://www.rfc-editor.org/info/rfc9195>.

   [RFC9254]  Veillette, M., Ed., Petrov, I., Ed., Pelov, A., Bormann,
              C., and M. Richardson, "Encoding of Data Modeled with YANG
              in the Concise Binary Object Representation (CBOR)",
              RFC 9254, DOI 10.17487/RFC9254, July 2022,
              <https://www.rfc-editor.org/info/rfc9254>.

   [STD91]    Internet Standard 91,
              <https://www.rfc-editor.org/info/std91>.
              At the time of writing, this STD comprises the following:

              Bierman, A. and M. Bjorklund, "Network Configuration
              Access Control Model", STD 91, RFC 8341,
              DOI 10.17487/RFC8341, March 2018,
              <https://www.rfc-editor.org/info/rfc8341>.

   [YANG-LIBRARY]
              Veillette, M., Ed. and I. Petrov, Ed., "Constrained YANG
              Module Library", Work in Progress, Internet-Draft, draft-
              ietf-core-yang-library-03, 11 January 2021,
              <https://datatracker.ietf.org/doc/html/draft-ietf-core-
              yang-library-03>.

   [yangcatalog]
              "YANG Catalog", <https://yangcatalog.org>.

Appendix A.  ".sid" File Example

   The following ".sid" file ('ietf-system@2014-08-06.sid') has been
   generated using the following YANG modules:

   *  'ietf-system@2014-08-06.yang' (defined in [RFC7317])

   *  'ietf-yang-types@2013-07-15.yang' (defined in [RFC6991])

   *  'ietf-inet-types@2013-07-15.yang' (defined in [RFC6991])

   *  'ietf-netconf-acm@2018-02-14.yang' (defined in [RFC8341]) [STD91])

   *  'iana-crypt-hash@2014-08-06.yang' (defined in [RFC7317])

   For purposes of exposition, per [RFC8792], line breaks have been
   introduced below in some JSON strings that represent overly long
   identifiers.

   =============== NOTE: '\' line wrapping per RFC 8792 ================

   {
     "ietf-sid-file:sid-file": {
       "module-name": "ietf-system",
       "module-revision": "2014-08-06",
       "description": "Example '.sid' file",
       "dependency-revision": [
         {
           "module-name": "ietf-yang-types",
           "module-revision": "2013-07-15"
         },
         {
           "module-name": "ietf-inet-types",
           "module-revision": "2013-07-15"
         },
         {
           "module-name": "ietf-netconf-acm",
           "module-revision": "2018-02-14"
         },
         {
           "module-name": "iana-crypt-hash",
           "module-revision": "2014-08-06"
         }
       ],
       "assignment-range": [
         {
           "entry-point": "1700",
           "size": "100"
         }
       ],
       "item": [
         {
           "namespace": "module",
           "identifier": "ietf-system",
           "sid": "1700"
         },
         {
           "namespace": "identity",
           "identifier": "authentication-method",
           "sid": "1701"
         },
         {
           "namespace": "identity",
           "identifier": "local-users",
           "sid": "1702"
         },
         {
           "namespace": "identity",
           "identifier": "radius",
           "sid": "1703"
         },
         {
           "namespace": "identity",
           "identifier": "radius-authentication-type",
           "sid": "1704"
         },
         {
           "namespace": "identity",
           "identifier": "radius-chap",
           "sid": "1705"
         },
         {
           "namespace": "identity",
           "identifier": "radius-pap",
           "sid": "1706"
         },
         {
           "namespace": "feature",
           "identifier": "authentication",
           "sid": "1707"
         },
         {
           "namespace": "feature",
           "identifier": "dns-udp-tcp-port",
           "sid": "1708"
         },
         {
           "namespace": "feature",
           "identifier": "local-users",
           "sid": "1709"
         },
         {
           "namespace": "feature",
           "identifier": "ntp",
           "sid": "1710"
         },
         {
           "namespace": "feature",
           "identifier": "ntp-udp-port",
           "sid": "1711"
         },
         {
           "namespace": "feature",
           "identifier": "radius",
           "sid": "1712"
         },
         {
           "namespace": "feature",
           "identifier": "radius-authentication",
           "sid": "1713"
         },
         {
           "namespace": "feature",
           "identifier": "timezone-name",
           "sid": "1714"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:set-current-datetime",
           "sid": "1715"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:set-current-datetime/input",
           "sid": "1775"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:set-current-datetime/input/\
                                                      current-datetime",
           "sid": "1776"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system",
           "sid": "1717"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-restart",
           "sid": "1718"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-shutdown",
           "sid": "1719"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state",
           "sid": "1720"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/clock",
           "sid": "1721"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/clock/boot-datetime\
                                                                      ",
           "sid": "1722"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/clock/current-\
                                                              datetime",
           "sid": "1723"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/platform",
           "sid": "1724"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/platform/machine",
           "sid": "1725"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/platform/os-name",
           "sid": "1726"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/platform/os-release\
                                                                      ",
           "sid": "1727"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system-state/platform/os-version\
                                                                      ",
           "sid": "1728"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication",
           "sid": "1729"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user",
           "sid": "1730"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user-\
                                                  authentication-order",
           "sid": "1731"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user/\
                                                        authorized-key",
           "sid": "1732"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user/\
                                              authorized-key/algorithm",
           "sid": "1733"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user/\
                                               authorized-key/key-data",
           "sid": "1734"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user/\
                                                   authorized-key/name",
           "sid": "1735"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user/name",
           "sid": "1736"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/authentication/user/\
                                                              password",
           "sid": "1737"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/clock",
           "sid": "1738"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/clock/timezone-name",
           "sid": "1739"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/clock/timezone-utc-offset\
                                                                      ",
           "sid": "1740"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/contact",
           "sid": "1741"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver",
           "sid": "1742"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/options",
           "sid": "1743"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/options/\
                                                              attempts",
           "sid": "1744"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/options/\
                                                               timeout",
           "sid": "1745"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/search",
           "sid": "1746"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/server",
           "sid": "1747"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/server/name",
           "sid": "1748"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/server/udp-\
                                                               and-tcp",
           "sid": "1749"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/server/udp-\
                                                       and-tcp/address",
           "sid": "1750"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/dns-resolver/server/udp-\
                                                          and-tcp/port",
           "sid": "1751"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/hostname",
           "sid": "1752"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/location",
           "sid": "1753"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp",
           "sid": "1754"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/enabled",
           "sid": "1755"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server",
           "sid": "1756"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server/association-\
                                                                  type",
           "sid": "1757"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server/iburst",
           "sid": "1758"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server/name",
           "sid": "1759"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server/prefer",
           "sid": "1760"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server/udp",
           "sid": "1761"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server/udp/address",
           "sid": "1762"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/ntp/server/udp/port",
           "sid": "1763"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius",
           "sid": "1764"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/options",
           "sid": "1765"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/options/attempts",
           "sid": "1766"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/options/timeout",
           "sid": "1767"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/server",
           "sid": "1768"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/server/\
                                                   authentication-type",
           "sid": "1769"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/server/name",
           "sid": "1770"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/server/udp",
           "sid": "1771"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/server/udp/address\
                                                                      ",
           "sid": "1772"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/server/udp/\
                                                   authentication-port",
           "sid": "1773"
         },
         {
           "namespace": "data",
           "identifier": "/ietf-system:system/radius/server/udp/shared-\
                                                                secret",
           "sid": "1774"
         }
       ]
     }
   }

   Figure 3: Example ".sid" File ('ietf-system', with Extra Line Breaks)

Appendix B.  SID Autogeneration

   The assignment of SIDs to YANG items SHOULD be automated.  The
   recommended process to assign SIDs is as follows:

   1.  A tool extracts the different items defined for a specific YANG
       module.

   2.  The list of items is sorted in alphabetical order.  'namespace'
       entries are sorted in descending order, and 'identifier' entries
       are sorted in ascending order.  The 'namespace' and 'identifier'
       formats are described in the YANG module 'ietf-sid-file' defined
       in Section 4.

   3.  SIDs are assigned sequentially from the entry point up to the
       size of the registered SID range.  This approach is recommended
       to minimize the serialization overhead, especially when the delta
       between a reference SID and the current SID is used by protocols
       aiming to reduce message size.

   4.  If the number of items exceeds the SID range(s) allocated to a
       YANG module, an extra range is added for subsequent assignments.

   5.  The 'dependency-revision' list item should reflect the revision
       numbers of each YANG module that the YANG module imports at the
       moment of file generation.

   When updating a YANG module that is in active use, the existing SID
   assignments are maintained.  (In contrast, when evolving an early
   version of an Internet-Draft that has not yet been adopted by a
   community of developers, SID assignments are often better done from
   scratch after a revision.)  If the name of a schema node changes but
   the data remain structurally and semantically similar to what was
   previously available under an old name, the SID that was used for the
   old name MAY continue to be used for the new name.  If the meaning of
   an item changes, a new SID MAY be assigned to it; this is
   particularly useful for allowing the new SID to identify the new
   structure or semantics of the item.  If the YANG data type changes in
   a new revision of a published module such that the resulting CBOR
   encoding is changed, then implementations will be aided significantly
   if a new SID is assigned.  Note that these decisions are generally at
   the discretion of the YANG module author, who should decide if the
   benefits of a manual intervention are worth the deviation from
   automatic assignment.

   In the case of an update to an existing ".sid" file, an additional
   step is needed that increments the ".sid" file version number.  If
   there was no version number in the previous version of the ".sid"
   file, 0 is assumed to be the version number of the old version of the
   ".sid" file and the version number is 1 for the new ".sid" file.
   Apart from that, changes to ".sid" files can also be automated using
   the same method as that described above, except that in step #3,
   previous SID assignments are kept, only previously unassigned YANG
   items are processed. processed, and these are assigned previously unassigned
   SIDs.  Already-existing items in the ".sid" file should not be given
   new SIDs.

   Note that ".sid" file versions are specific to a YANG module
   revision.  For each new YANG module or each new revision of an
   existing YANG module, the version number of the initial ".sid" file
   either (1) should be 0 or (2) should not be present.

   Note also that RPC or action "input" and "output" YANG items MUST
   always be assigned SIDs even if they don't contain further YANG
   items.  The reason for this requirement is that other modules can
   augment the given module and those SIDs might be necessary.

Appendix C.  ".sid" File Lifecycle

   Before assigning SIDs to their YANG modules, YANG module authors must
   acquire a SID range from a registry of YANG-SID Ranges.  If the YANG
   module is part of an IETF Internet-Draft or RFC, the SID range needs
   to be acquired from the "IETF YANG-SID Ranges" registry as defined in
   Section 7.4. 6.4.  For the other YANG modules, the authors can choose to
   acquire a SID range from any registry of YANG-SID Ranges.

   Once the SID range is acquired, owners can use it to generate one or
   more ".sid" files for their YANG module or modules.  It is
   recommended to leave some unallocated SIDs following the allocated
   range in each ".sid" file in order to allow better evolution of the
   owners' YANG modules in the future.  Generation of ".sid" files
   should be performed using an automated tool.  Note that ".sid" files
   can only be generated for YANG modules and not for submodules.

C.1.  ".sid" File Creation

   The following activity diagram summarizes the creation of a YANG
   module and its associated ".sid" file.

          +---------------+
    o     | Creation of a |
   -+- -->| YANG module   |
   / \    +------+--------+
                 |
                 v
          .-------------.
         / Standardized  \     yes
         \ YANG module?  /------------+
          '-----+-------'             |
                |  no                 |
                v                     v
         .-------------.      +---------------+
   +--> / Constrained   \ yes | SID range     |
   |    \ application?  /---->| registration  |<--------+
   |     '-----+-------'      +------+--------+         |
   |           |  no                 |                  |
   |           v                     v                  |
   |    +---------------+    +---------------+          |
   +----+ YANG module   |    | SID subrange  |          |
        | update        |    | assignment    |<---------+
        +---------------+    +-------+-------+          |
                                     |                  |
                                     v                  |
                            +---------------+    +------+------+
                            | ".sid" file   |    | Rework YANG |
                            | generation    |    |    module   |
                            +-------+-------+    +-------------+
                                    |                   ^
                                    v                   |
                              .----------.  yes         |
                             /  Work-in-  \ ------------+
                             \  progress? /
                              '----+-----'
                                   |  no
                                   v
                          .-------------.
                         /      RFC      \ no
                         \  publication? /--------------+
                          '------+------'               |
                            yes  |                      |
                                 v                      v
                       +---------------+        +---------------+
                       |     IANA      |        | Third-party   |
                       | registration  |        | registration  |
                       +-------+-------+        +-------+-------+
                               |                        |
                               +------------------------+
                               v
                             [DONE]

                          Figure 4: SID Lifecycle

C.2.  ".sid" File Update

   The following activity diagram summarizes the update of a YANG module
   and its associated ".sid" file.

           +---------------+

           +------------------+
     o     | Update of the    |
    -+- -->| YANG module module,     |
    / \    | or include(s) its include(s),  |
           | or its import(s) |
           +------+--------+
           +------+-----------+
                  |
                  v
              .-------------.
             /  New items    \ yes
             \  created?     /------+
              '------+------'       |
                     |  no          v
                     |       .-------------.      +----------------+
                     |      /  SID range    \ yes | Extra subrange |
                     |      \  exhausted?   /---->| assignment     |
                     |       '------+------'      +-------+--------+
                     |              |  no                 |
                     |              +---------------------+
                     |              |
                     |              v
                     |      +---------------+
                     |      | ".sid" file   |
                     |      | update based  |
                     |      | on previous   |
                     |      | ".sid" file   |
                     |      +-------+-------+
                     |              |
                     |              v
                     |       .-------------.      +---------------+
                     |      /  Publicly     \ yes | YANG module   |
                     |      \  available?   /---->| registration  |
                     |       '------+------'      +-------+-------+
                     |              | no                  |
                     +--------------+---------------------+
                                    |
                                    v
                                  [DONE]

                   Figure 5: YANG and ".sid" File Update

Appendix D.  Keeping a ".sid" File in a YANG Instance Data File

   [RFC9195] defines a format for "YANG instance data".  This
   essentially leads to an encapsulation of the instance data within
   some metadata envelope.

   If a ".sid" file needs to be stored in a YANG instance data file,
   this can be achieved by embedding the value of the ".sid" file as the
   value of the content-data member in the following template and
   copying over the second-level members as indicated with the angle
   brackets:

   {
     "ietf-yang-instance-data:instance-data-set": {
       "name": "<module-name>@<module-revision>.sid",
       "description":  ["<description>"],
       "content-schema": {
         "module": "ietf-sid-file@2023-10-27"
       },
       "content-data": {  <replace this object>
         "ietf-sid-file:sid-file" : {
           "module-name": ...
         }
       }
     }
   }

Acknowledgments

   The authors would like to thank Andy Bierman, Abhinav Somaraju, Peter
   van der Stok, Laurent Toutain, and Randy Turner for their help during
   the development of this document and their useful comments during the
   review process.  Special thanks go to the IESG members who supplied
   very useful comments during the IESG processing phase, in particular
   to Benjamin Kaduk and Rob Wilton, and to Francesca Palombini as
   responsible AD.

Contributors

   Andy Bierman
   YumaWorks
   685 Cochran St.
   Suite #160
   Simi Valley, CA 93065
   United States of America
   Email: andy@yumaworks.com

Authors' Addresses

   Michel Veillette (editor)
   Trilliant Networks Inc.
   610 Rue du Luxembourg
   Granby Quebec J2J 2V2
   Canada
   Phone: +1-450-375-0556
   Email: michel.veillette@trilliant.com

   Alexander Pelov (editor)
   IMT Atlantique
   2 rue de la Châtaigneraie
   35510 Cesson-Sévigné Cedex
   France
   Email: alexander.pelov@imt-atlantique.fr

   Ivaylo Petrov (editor)
   Google Switzerland GmbH
   Brandschenkestrasse 110
   CH-8002 Zurich
   Switzerland
   Email: ivaylopetrov@google.com

   Carsten Bormann
   Universität Bremen TZI
   Postfach 330440
   D-28359 Bremen
   Germany
   Phone: +49-421-218-63921
   Email: cabo@tzi.org

   Michael Richardson
   Sandelman Software Works
   Canada
   Email: mcr+ietf@sandelman.ca